Vikanshu Primer-Ob (Oiled Base) :

Cold applied oil bound Bituminous Primer for prior to any Bituminous treatment & maintenance in no fire zone.

Vikanshu Kote-Wb (Water Base) :

Water bound Bituminous primer for pre base primer coating before water proofing, protection over insulations and other industrial use.

Surface Preparation :

All areas to be coated must be clean, dry and free of oil, grease and dirt. Check existing coatings for proper adhesion; remove loose, flaking material. Check existing surface for compatibility, do a test patch over questionable surfaces. Temperature range for application: 40 to 100 degrees F. Apply one coat with brush, roller or airless sprayer. Coverage rate will vary based on type and condition of surface. Estimated coverage rate: 50 to 100 square feet per gallon. Approximate dry time: one hour, but will vary based on ambient weather conditions. Product is milky white in can, dries to a translucent film. When dry, Primer-kote can be top-coated with Roof-kote, Metal 1-kote or Tuff-kote.

Recommended For :

Primer-kote can be used as a primer and sealer over bitumen, modified bitumen, asphalt, rolled roofing, fiberglass, galvanized steel, aluminium, concrete, concrete block, brick and wood. Primer-kote seals against asphalt bleed-through on bituminous surfaces, seals concrete, block and brick against excessive alkalinity and efflorescence and primes galvanized metal and aluminium for maximum adhesion and flexibility of the finished coating. Do not use Primer-kote on membranes such as new Hypalon, new PVC, polypropylene and TPO or over new electrometric coatings. Before coating ANY roof, always do a test patch to check for compatibility, adhesion and soundness.