Vikanshu Bitumen
Black Glossy Paint

Home Vikanshu Bitumen Black Glossy Paint
Vikanshu Cold Bit
Vikanshu Cold Bit
Vikanshu Cold Bit
Vikanshu Cold Bit

Vikanshu Bitumen Black
Glossy Paint

Type Black gloss paint based on a mixture of dryers, oils and bitumen black. Intended Use Protecting steel and metal work. May also be used on wood.

Special Features Exceptional resistance to water penetration and attack by acids, alkalis and chemicals in general.

Coating Instruction :
  • Coats - One coat is usually sufficient. If applying to absorbent timber, than first coat with 10-20% white spirit and apply a second coat.
  • Drying Time - The product is touch dry in approximately 2 hours and hard dry after 16-24 hours depending on temperature and humidity.
  • Re-coating Time - 16-24 hours if necessary.
  • Application Temp. - Ideally 15-25 °C. Do not use below 10 °C or in conditions of high humidity.
  • Coverage Approx. - 12-14 sq. meters / litre per coat depending on the absorbency of the surface.

Preparation :

Metal surfaces must be clean and free from dust, oil, grease and any other contaminants likely to affect adhesion and drying rate. Old paint must be removed with Striped Paint and Varnish remover. Any loose rust should be removed with a wire brush and for maximum protection the surface should be treated with Rust Remover Application Apply liberally with a brush.